Brandt KDN 980 single sided edgebanders

Description

Brandt Automatic Edgebander
Model: KDN-980 2C
Year Of MFG: 2004
Automatic height adjustment of all work stations when upper pressure beam adjusted.
PC-16 Program Control:
-
Passive matrix Color LCD screen, 7.4”, VGA standard resolution of 640x480
-
8 mb IDE Flash Disc 100 mhz 486 DX4 Hard Drive
-
8 mb RAM
-
Internal modem for remote diagnostic link
Control panel located at machine infeed for operator convenience.
Automatic edge feed device for coil feeding from outside the machine.
Two coil magazine system.
Wider magazine with auto feeding of wood strip material from outside the machine.
Quick-melt granulate glue application system with approximately 12 minute heatup time.  Pneumatic positioning and locking of the unit.
Reversible rotation of glue application roller.  Retractable glue roller.
Infrared heating unit positioned between glue roller and pressure zone contributes to improved edge quality.
First pressure roller driven and four idle pressure rollers, all with pneumatically controlled side pressure.
End trimming unit with straight and chamfer capability.  Chamfer up to 15
°
.
Program controlled pneumatic indexing straight to bevel.
Top and bottom flush trimming unit
,  Includes straight insert cutters.
Two position vertical pneumatic indexing for flush trimming or rough trimming.
Top and bottom fine trimming unit
, Radius cutters included.
Pneumatic indexing.
Top and bottom contour trimming units
.
Scraping unit for rigid PVC edges with digital “Quickset” system.
Oscillating jump buffing unit.
PVC Post heating system for dark PVC edge materials
Technical Specifications
Edge band thickness
0.4 - 20 mm (0.016" - 25/32")
Edgeband height
12 - 65 mm (1/2" - 2 1/2")
Panel length min.
160 mm (6 3/8")
Panel width min.
65 mm (2 1/2")
Panel thickness - min.
- max.
8 mm (5/16")
60 mm (2 3/8")
Feed speed – variable
11 – 20 m/min  ( 36 – 65 FPM )
max when corner rounding = 52 FPM
max using solid wood = 52 FPM
Feed motor
2.2 kw (3 HP)
Pressure section
First roller driven, four rollers idle
End trim unit - two motors
Cutting speed
Straight cut capacity max.
0.75 kw (1 HP)
12,000 RPM
10 x 50 mm (25/64" x 2")
20 x 40 mm (25/32" x 1 9/16")
Flush trimming unit
Cutter speed
1.5 kw (2 HP)
12,000 RPM
Fine trimming unit
Tilting range
Cutter speed
.55 kw (3/4 HP ea)
0 - 25
°
12,000 RPM
Contour trimming unit - top and bottom
0.35 kw (1/2 HP ea - two motors)
Machine length
7360 mm (24’ 2")
Machine width
1730 mm (68")
Working height
900 mm (35 1/2")
Total height
2000 mm (78 3/4")
Machine net weight
3200 kg  ( 7040 lbs. )
Amperage:  70 amps @ 230 volts, 35 amps @ 460 volts.
Total power required: 23 kw.
Electrical connection: 208/230 or 440/480 volt, 3-phase, 60 Hz.
Dust extraction: 1x 120 ( 4 ¾” ) 700 CFM, 1x 160 mm (6 1/4") 900 CFM, 1x 100 mm ( 4” )  600 CFM.
Compressed air connection:  0.18 CFM per panel, 7 bar (100 PSI).